2024/5/8 16:56:57
358
1 Features
• Operating voltage range of 4.5 V to 5.5 V
• High-current 3-state true outputs can drive up to 15 LSTTL loads
• Low power consumption, 80-μA max ICC
• Typical tpd = 22 ns
• ±6-mA output drive at 5 V
• Low input current of 1 μA max
• Inputs are TTL-voltage compatible
• Eight D-type flip-flops in a single package
• Full parallel access for loading
2 Description
These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
The eight flip-flops of the ’HCT374 devices are edgetriggered D-type flip-flops. On the positive transition ofthe clock (CLK) input, the Q outputs are set to the logic levels that were set up at the data (D) inputs.
An output-enable (OE) input places the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.
热门型号
热门资讯
20万现货SKU
品类不断扩充
科技智能大仓储
4小时快速交货
仅从原厂和代理商进货
每一颗料均可原厂追溯
明码标价节省时间成本
一站式采购正品元器件
工商网监